Lowest of the Low Pt 4

We come to the last of our Grot posts - the command squad - in true IG fashion, the Grots of Da Longteef have cobbled together a command squad of sorts, including a Lieutenant, Kommisar and a few 'special' weapons.  These particularly intelligent, brave, ambitious or willing Grots bark orders (a few even correctly) and generally try to keep the squad moving in the right direction.

The Lieutenant is built in same fashion as the other grots, though this time with an officer cap (again from Basicks), a grot-sized chain sword and a las pistol - a fancier weapon, as befitting his rank, than the crude pistols the other grots use.  Finally, a fur half cloak from the Empire White Wolf upgrade sprue makes a nice cape and gives him just a little more 'authority'.

The one element of the IG  that remains an ongoing mystery to the Orks is why you would have two people in charge (the concept of morale being largely lost on a Ork mind).  Never the less, there must be a reason - in this case to mostly give contradictory orders and add to the general chaos that is an Ork battlefield.

The Kommissar is a goblin officer from Basicks with the most Commisar looking hat from their officer head sprue.

Finally, one of the special weapons.  This is one of the older pre-plastic GW grots, though I've sawed him in half to give him some pants and boots.  I think the blunderbuss works great a special weapon - like a crude, big blast shotgun 

Here is a shot of the entire command squad.  The dual pistols and Necromunda shotgun are really just place holders until I can find something a little more characterful.

And finally, the current squad all together.

Hope you're liking this look at the Orks.  Please comment and follow on facebook..
Next post we'll have a new squad!

 

 

Lowest of the Low Pt 3

In keeping with the more independent, more trained feel of da Longteef Grot squads, I opted to give them a command squad (next post).  But then that didn't really leave a spot for an Ork Runtherd.

So I opted for Runtbots instead (anyone remember those?).  That way the Grots could to operate on their own, but the Orks could still keep an eye on them (and 'collect' any of the squad that got misdirected).

From a modelling aspect, it was a nice retro nod to the Orks of old and allowed me to use all those cool Ork robot bits out there!

The Runtbots are a primarily Kromlech's Clanking Desytroyers with a little plasticard, random bionics and graba sticks from GW.  

The Ork in the center (who sadly has not been painted yet) is Kurgog, the Sgt Major of the Army and in charge of all the Grot forces.  The mini is from Mantic's Deadzone Marauders faction.  I just love all the medals and epaulets.  In general, I find Mantic's Orcs too different in design to use with GW,  but I couldn't pass this one up, so tweaked him a little and added a Kromlech officer head.  Mantic also has a Goblin sniper team which I think would work well.

I'm really happy with the look of them, but it evolved over several tries.  Originally there were just rust with a little black.  I then went back and added detail like that checkerboard and dags.  It took quite a few tries before I found a colour for the face that played well with everything.

The Graba Sticks are also magnetized to you can swap them out for a Grot-Prod.

And, of course, you have to have a Squid Hound.  Given the Runtbots, this seemed like a perfect place for another Mekano Squig (from Wargame Exclusive Miniatures).

And finally a shot of them together.  Hope you liked this look at the Runtherds.
I will finish this off next post (promise) with the Grot Command Squad.

Please follow on facebook and feel free to leave comments or email.

Lowest of the Low Pt 2

Continuing on with the Grots of Da Longteef, we're now looking at the close combat side.  Those Grots that prove to be more courageous, reckless (or just poor shots) end up in one of the assault sections.

These Grots are built in the same fashion, largely based off the GW Fantasy Goblin range and Basick's heads.  The guns are a collection of old Necromunda weapons, both metals and plastics, and the sword is a knife from the 40K Ork sprue. 

The backpacks are a random assortment of GW, 3rd party producers, and WWII plastic kits.  Basically, whenever I see a set of backpacks I buy them.  I find the variation provides a bit of the random, slapped together feel the Orks are known for and still gives then a "uniform".

Finally, here is a group shot.  I'll wrap this up next post with the command squad!

Lowest of the Low Pt 1

From the mighty, towering Warbosses, we now swing to the other end of the spectrum with the lowly Grot. The labourers, assistants and functionaries that make Ork society (such as it is) function, and occupy the lowest rung in the Warbands.

I avoided GW's Grot with its loin cloth and bare feet, as being too wild and not representative of the IG theme of the Blood Axe army.

I envisioned the Blood Axe's using their Grots more strategically, actually training and equipping them to serve, admittedly as unequal partners, in their Waaaghs.  After all, Grots already man the artillery and pilot Killer Kans, so not that far of a stretch.

I also recalled the Whiteshields from early editions of the IG (and I think more recently with Cadians). More inexperienced and less battle hardened recruits seemed like a thematic match with the Grots, so added a white arm band as a nod to those old Whiteshield units.

The first 'squad' of Grots is a Rifle section.  There's a fair number of components that go into these guys (totally reasonable for a 2 pt guy that you need 60-90 of, right?)

  1. The body is from GW's Fantasy Goblin range, only using the less 'medieval' legs and torso.
  2. Bare heads are GW Goblin heads, while the helmeted heads are from Basicks, one of the early (and now defunct) Polish microcasters, created after the split at MicroArts Studio.
  3. The guns are converted Lasguns from the plastic Orlock Necromunda sprue
  4. The other arm is from the GW Empire Flagellants range
  5. Finally I added things like kit from the IG sprue and a random assortment of backpacks

I've painted them in my standard Longteef colour scheme, kind of an urban camo, with bluey greys and whites and a touch of actual camo on the helmets.  I felt I needed to include some actual camo as its a distinctive feature of the Blood Axes, but too much can look muddled (not to mention its quite time consuming to paint)  so  I felt that just the helmet was a good compromise.

Hope you like this intro to the more rank and file and will be back next post with more of the Grots!

Red ones go fasta! Pt 1

I'm starting our look at Da Longteef with the Big Mek, Gogstompa.  Gogstompa holds the rank of Kolonel and leads Grimtoof's walker warband - stompas, dreads, nauts and cans!

The fig is the old metal Big Mek GW miniature.  In keeping with the Blood Axe/IG theme, I figured the meks would take after the Adeptus Mechanicus so I painted him red and sculpted a hood with dags (instead of gears).  I really liked the idea that the Ad Mech are predominantly red and this somehow validates the Ork's belief that 'red ones go fasta!'

I also added a backpack with a little more horsepower - a old Killer Kan power plant.  I then fitted it with a couple of power claws from Kromlech, to help when building those big walkers.  Admit it, every 'converter' wishes they had three arms at some point.

And of course I magnetized the arms and head just in case I needed swap anything out down the road.  I have no real reason for doing this other than I'm afraid to commit to any one wargear option.

Of course, every mek has his grot oilers.  I figured the pit chief would try to emulate his boss, so used a Night Goblin for the red robes.  He's had a few less then well though-out upgrades. His assistants are a grot from the current plastic box (with custom blow torch) and a converted grot from Spell Crow with power hammer.

Finally, threw in an attack squig for good measure.  When I saw these mekano squigs from Wargame Exclusive, I knew they would work perfectly for a Big Mek.  They are painted up using the standard GW rust technique (Ryza Rust over Typhus Corrosion).  All my Ork robots have this super rusted look because, Orks.

And here is the group all together.

Hope you liked this first look at Da Longteef, my Blood Axe warband.  Lots more to come!

Da Longteef

“I’s General Grimtoof and de’s ‘ere is da Longteef. As we’s ‘ere to smash da ‘umies”

My Blood Axe warband is know as Da Longteef, a reference to their success (both in wealth and longevity) as mercenaries.  They are lead by the Warlord General Grimtoof. 

“The Blood Axes are an Ork clan and were the first of the clanz to encounter the Imperium. During their exposure and battles they picked up many human tactics, such as using camouflage (although often it is too bright to actually disguise the Ork), using looted Imperial vehicles and retreating when they’re losing...All of these things lead followers of other clans to brand them as dangerously treacherous, cowardly, and downright un-Orky.

In fact, most of the Blood Axes’ reputation is undeserved. True, they have made the most contact with the Imperium, occasionally even fighting for the humans as mercenaries, and making extensive use of Imperial war materiel. Then again, every Ork can see the funny side of extorting weapons from human planets only to use them against their former owners.”
— Blood Axes, Lexicanum

Da Longteef spend most of the their time in Imperial space, renting their services as mercenaries to anyone who will supply them with arms and equipment.  They often travel with Ork Freebooters (pirates) serving as a ground force or boarding force, even working for the famed Freebooter, Kaptin Badrok.

Like others of the Blood Axe clan, they model their military structure off of the Imperial Guard.  Grimtoof has five large warbands under him, each lead by one of his Kolonels.  Each warband is structured around a different function: infantry, recon, armour and artilery, walkers and air power - elements from each can be combined  to create a tailored force to the mission - a most unorky idea.

Ork Kommandos by Musibat Khan

Ork Kommandos by Musibat Khan

Orks is da best!

I'm an old Ork player from way back.  I started in 2nd Edition with the clans, built and painted my first army and that army has been evolving ever since.

Ork Codex - left to right: 2nd Ed (1994), 3rd Ed (1999), 4th Ed (2008), 7th Ed (2014)

Ork Codex - left to right: 2nd Ed (1994), 3rd Ed (1999), 4th Ed (2008), 7th Ed (2014)

The first iteration of the army was mostly a Badmoon force.  It was small and largely made up of the very first plastic Space Orks boyz combined with the old single piece figs common to 2nd Ed.  These were my university days so was largely out of the hobby and the army remained small.

Somewhere I have the Badmoon Warboss and his Goff retinue.  I've searched high and low with no luck - if I ever find them I'll come back and update this post.

With the coming of 3rd Ed, five years later, I was getting back into the hobby.  The Ork boyz plastics got a significant upgrade - in fact they've remained largely unchanged to this day.  I began the second iteration of my force.  Despite the clan rules being gone, I still clung to the old ways and this new army had elements of Deffskulls, Evil Sunz, Blood Axes and even Snakebites.

We then entered the great drought.  It would be 9 years until a new dex and any significant re-release would come out.  In those years, I moved away from the scattered multicolour look of the various clans in favour of a single unified look.  My front runner was Speed Freaks, but there was one problem - no good Ork vehicle kits.  I opted instead for Blood Axes.  I liked the more serious, militaristic look and I could use IG kits for the absent Ork vehicles.   The third iteration of the army was underway.

Blood Axe Battlwagon based off several IG Chimera kits

When 4th Ed came along and with it new love from both GW and Forgeworld I had a new conundrum. Orks finally had good kits.  While I liked the IG theme of army I wanted to make use of the new kits and give the army more of an 'orky' feel.  I retired many of the vehicles in favour of the new Ork ones.  I also took the opportunity to give all the units an upgrade, rebasing, unifying the colour scheme and adding detail.  The 4th and current iteration began and has lasted right through the 7th Ed dex.

Over the next few months I'll go through the current version of my Ork force, a highly converted Blood Axe army incorporating GW and Forgeworld models as well as a wide variety of micro-casters.

 

Ladies and gentlemen, the Witch Hunters

With the completion of the Death Cult Assassins last time, this post will officially wrap up 'round one' of the Witch Hunters.  

There will certainly be a 'round two' at some point (and just between us, I already have a few odds and ends in the works).  And as I mentioned on Facebook, I backed the Raging Heroes Toughest Girls in the Galaxy 2: Light and Darkness Kickstarter and now have an entire Sisters army en route.  So there will likely be a round three and four.

The army consists of (at least under the old rules):

  • 1 Ordo Hereticus Witch Hunter and Retinue
    (2 heretics, 3 acolytes, 2 chergyeons, 3 death cult assassins)
  • 2 squads (10 man) of Inquisitorial Stormtroopers, each with Chimera transport
  • 1 squad (20 man) of Zealots
  • 1 Penitent Engine

I hope to get this army to the table at some point though it still woefully lacks any real hitting power.

I have also added a Project section to the blog which will house all the Witch Hunter photos and colour text posted to date.

Up next will be an entire new army: Orks!
So stay tuned! 

Job security

To give the retinue a little more punch in hand-to-hand, I added 3 Death Cult Assassins (again, when these were their own unit).  

Fortunately, both the Inquisition and Adeptus Sororitas books still allow you to take these guys, now as part of the retinue. 

I keep the general army colour scheme or gold, red and brown with a little green accent.  I may go back and add a little detailing on their skirts one day.

The models are the OOP Confrontation Clones of Dirz.  The original model came with a sword and axe, so did a weapon swap with the axe hand to add a second Power Sword.  I cut down a Catachan Power Sword by removing the back half of the blade to make it less bulky.  These models area little more 'true-scale' than the GW, but I think that works for a lean, agile assassin.

I was quite taken (as I suspect like many of us were) with Rackham's line of Confrontation miniatures.  If you've never heard of them, you can read the Wikipedia entry to learn about the company and the world, and this catalog site to see their line of figs.

And while I never played the game I certainly bought a good number of their figs - and a great deal more when the company eventually went under and stores started to dump inventory.  I still have a shoe box filled with unopened blisters.  Beyond the quality of the sculpts, the bizarre, fantastical (if slightly over the top) art style makes for some outstanding Inquisition figs.

You can still purchase some of the figs from Legacy Miniatures (ie. CMON) and a few other places (although not sure they are licensed or recasters so will avoid putting links)

Hope you like and please follow me on facebook:
https://www.facebook.com/MechanicusRex

The Unwashed Masses

I've been talking about how I divided my Zealots into two types - the Acolytes, the low level members of the Imperial Church, and the members of the Congregation.  The last 3 posts dealt with the Acolytes.  This post will focus on the Congregation.  Largely made up of  raggedy men - unprepared, uninformed, under-equipped fodder - that answered the ecclesiastic call, left jobs, homes, and families to fight and die for the Emperor.

This first group is based mostly off the Empire Flagellants box - its really the go-to box for any robed humans and provides a great base for all kinds of conversions.  

There's also the odd Necromunda  Redemptionist thrown-in.  Either the original gang from 1997 or the early 2000s re-sculpts are another great source of 'priest' figs.  I'll eventually throw in other similar models to bolsters the ranks (e.g. more Redemptionists, Empire Warrior Priests, or even the new plastic Chaos Cultists).

The Congregation are differentiated from Acolytes (in red) by their more drab brown robes.  But I've tried to tie them in by using red as an accent colour, particularly on the chain weapons.  And, of course, the liberal application of purity seals.

I've also tried to make them look a little more haphazard in terms of equipment, adding a few bits of kit (like IG pouches, Kroot shoulder pads, even a Space Marine arm) and a mix of chainswords and glaives.  The guns are mostly from the Empire Outriders and help provide an outdated feel to their equipment.

Here is the entire Congregation with their cult issue brown robes and chainswords, in all their zealotry and righteous fury.

And the full 20 man Zealot squad  - Acolytes and their Congregation

Thats all the troops for now.  Next post we go back to the retinue for one quick addition.

Hope you're enjoying this army.  

Men of Faith - Part 3

This is the last batch of 'acolytes' - the low level members of the Imperial church, that will form the command, special/heavy weapons of my Zealot squads.

The second of my Eviscerater wielding 'heavys'.  This is an old Necromunda Redemptionist fig (with, once again, head swapped with a mounted Chaos Marauder head - they just make great angry priest heads, what can I say).  I also replaced his bare feat with some proper combat boots!

The 'leader' of the squad, until I can attached a proper priest to them, is a converted Inquisitorial Coteaz Acolyte.  I replaced his banner with a Sisters of Battle shrine and his plasma gun with a torch.  He caries with him a number of holy books with which to minister to the faithful.  Again, the purple denotes his seniority.  

The last miniature of the group is the GW Missionary with Plasma Gun.  Minimal conversion here:  Swapped his staff banner (as I had used it elsewhere) and put on a back banner.

And finally a group shot of all nine.

Hope you like and please follow me on facebook:
https://www.facebook.com/MechanicusRex

Men of Faith - Part 2

Carrying on from last post, here are more zealots (aka random priestly models).  

I envisioned massive squads of raggedy imperial citizens, their faith bolstered by the presence of a few "official" members of the church - these acolytes would provide leadership, some military structure, and be responsible for the more powerful special/heavy weapons.

The next acolyte is the old Inquisitor Hierophant model, who works perfectly as a 'heavy' wielding an Eviserator.

This is another of the old GW metal Preachers.  Just a few simple conversions:

  • Mohawk hair was removed
  • Club was replaced with pistol from the Empire Free Company
  • Laspistol was replaced by a custom banner
  • Warhammer was added to his back

Similar to last post, this model is the same as the one above (yet another duplicate):

  • Removed both arms and replaced them with the Empire Solider captain arms and replaced the blade with a chainsword.  This also required a bit of reconstructive putty work on the cowl.
  • Swapped the head for another mounted Chaos Marauder head
  • The purple identifies him as a senior acolyte

Hope you like.

Men of Faith - Part 1

Issue 292 of White Dwarf included new rules to add units of Zealots to your Witch Hunter armies.  A stellar mob of raving adherents to the Imperial Cult, complete with unique weaponry (one use Handflamers and Evisterators) and led by a Demagogue or Priest - fantastic! 

This was the rock upon which my army would be based - Inquisitors and Priests as HQs, Stormtroppes as elites, Zealots as troops with all the Witch Hunter craziness filling in the gaps.  Ok, so never going to be a power army, but great fluff!

When I started modeling this unit I divided it into two types - actually low level functionaries of the church (initiates or acolytes training to one day to become confessors, missionaries or priests) and members of the congregation (imperial citizens who answered the crusade's call).

I'll start with the initiates/acolytes -  they would be made up of all the various priest (or priest-like) models GW had come up with over the years (including some Warrior Priests from the old WHFB range) .

As I mentioned in my last post, the rules for most of the non-Sister units are long gone, but I'll find these guys a home somewhere.

This is the stock Preacher model from Games Workshop.  I think these have some of the best facial expressions of any of the old GW metals.

Notice anything?  Over the years I accumulated quite a few priest models and inevitably some dupes.  This is the same model as above but with a little conversion work:

  • Removed the bell and replaced it with the parchment
  • Swapped the head with one from  the Empire Flagellants range
  • Replaced both hands with pistols from the Empire Outriders

Lastly, this is a converted GW Missionary.  Another duplicate (I used the original as part of another Inquisitor retinue):

  • Replaced both the arms with a blunderbuss from the Empire Free Company
  • Swapped the head with a Mounted Chaos Marauder (a set of truly great heads!)
  • Replaced the backpack with a old, old, old banner from a Necromunda Arch Zealot
  • Added a shoulder pad from Vampire Counts Grave Guard

Hope you like and please follow me on facebook:
https://www.facebook.com/MechanicusRex

 

Absolution cometh

Here's the next addition to the Witch Hunters.  I felt they needed something a little heavier, so busted out an old Penitent Engine I got at a Games Day (remember those) long, long ago.

It's an excellent model and hard to find a more 40K concept, but there is one little problem with the design.  The flamers on the arms extend out past the spinning saw blades - so unless the raving lunatic piloting it makes some pretty ginger cuts, there are going to be issues.

So the first conversion was to loose the arm flamers and re-position them at the waist.  
The second was to give it a little more dynamic pose by having it climbing up over some rocks.
Finally, I wanted to bulk up the model a little, so my third conversion was to

  • put an oil drum at the back (to feed the flamers),
  • put a suitably religious banner on top (from the old metal Terminator Librarian) and
  • add some shoulder pads (plastic ork bits)

Hope you like and feel free to leave comments in the blog or by email.

Maybe some of you are begining to suspect the Inquisition

Here are the next couple henchmen: 2 bodyguards for a little muscle/protection.

Merzick Cender - Bodyguard

Merzick was a PDF officer who worked his way up to Palace Guard for a royal magistar on Ionis IV. When the lord magistar and his court eventually fell to Slaanesh perversion and was brought low by Inquisitor Kanis, Merzick was the leader of the remaining loyalist guards and executed Magistar Verkix in the final assault on the palace.  Impressed with Merzick's leadership, fighting ability and loyalty to the God Emperor, Kanis recruited him as a bodyguard.

The mini is a stock Warmachine fig: Captain Maxwell Finn, a solo from Cygnar.

Konrad Tharsus - Warrior

Tharsus was born the son of a local noble in lower Thuringia on the Knight world of Thular XII.  Seeing a traveler waylaid by local brigands, Tharus leap to his defense, defeating the axemen and vowing safe travel for what turned out of be Kanis on a covert mission.  Now a bodyguard, he has traveled far beyond his primitive homeworld.  Trained by Merzick in the ways of the wider Imperium, he still prefers to fights with the more familiar, sword and shield.

The fig is an old reaper fighter miniature (long before any of the Bones).  He’s been ‘grim-darked’ by replacing his armored feet with Catachan combat boots, his sword swapped for a Power Sword and a Storm Shield and grenades added.

Inquisitor Sol and his Retinue

Finally, here is a shot of the entire retinue as it stands: Kanis, his bodyguards, chergyons, spymater, mystic and psyker.  I will certainly add more retinue members (and more Inquisitor bands), but for this is it for now. 

The next post will see a little more punch added to the army.  Stay tuned. 

No one expects the Inquisition Pt2

Here are the next 3 members of the warbard.

Galvrauche Adien Duneault - Spymaster

Kanis’ spymaster, Galvrauche is the centre of his “human” intelligence network, recruiting and managing a thousand sources across the sector.

The fig is is the old Highwayman miniature from GW - a "hired gun" from the old Mordheim game.  I always loved the mini so left him stock.

 

Adron Marks - Heretic

A repentant slave to dark gods, Adron grew-up as one of the countless street urchins in Gandin 4's hives.  His psychic potential went undetected - not surprisingly as, while not a null, he has the ability to absorb psychic energy rather than project it.  He eventually found a home in an underhive cult, who use his abilities to avoid detection and as protection during their dark rituals.  When the cult was eventually discovered and destroyed by Kanis, he recognized Adron’s potential.  Allowed to live,  Adron was branded a heretic and lives out his days in a null hood, in hopes that his service will in some small way offset his crimes against the Emperor.

He is built from a plastic Empire Flagellant with a goodly amount of bits.  I use to eschew decals for hand painted banners, but time constraints (and lack of freehand talent) eventually changed my mind - plus with Photoshop and printed decals, there is a world of possibilities.

 

Sara Bryante - Penitent

The Sabat War came to Ulgar 12 when Sara was 19.  The PDF was quickly overwhelmed by the disciplined warriors of the Blood Pact, their Chaos sorcerers using the savage bloodletting to rip open a tear into the immaterial allowing the Khornate powers to spill forth.  Town after town quickly fell in the backwater world - except one.  A beacon of light turned back the Blood Pact, banished their deamonic forces back and gave the high command a powerful weapon.  The Lord Militant quickly declared Sara a living saint and with her at the forefront of the remaining forces,  held off the invaders until reinforcements could arrive.  It was only then, under Ecclesiastical scrutiny that the truth was revealed.  She was one of the many well meaning, but misguided, psykers who believe their powers are a manifestation of the Emperor's divinity - but in Sara's case, merely the work of a Tzeentch deamon looking to weaken an Khorne adversary.  Kanis convinced the Ecclesiasticy to spare her to his custody - Sara accepts her fate as a witch touched by Chaos, but strives to unburden her soul by using the power of the Lord of Change, still within her body, to banish as many demonic entities as she can.

She is the stock OOP Tsilla, from the first edition of Helldorado.  

No one expects the Inquisition...

Over the next few posts I'll be covering the HQ for my Witch Hunters - an Inquisitor and his retinue. Unfortunately no WIPs of these guys.

The truth is, while I rarely get a chance play miniature games (because life), I rarely paint figs just for the sake of painting them.  I almost always paint to add to my various armies.  Of course, that hasn't stop me from buying a vast number of very cool, but very random one off figs from wide range of manufactures. A big draw of the Inquisitorial warband, beyond the cool fluff, was the opportunity to use (and therefore paint) all of these orphan figs for 40K.

I decided that I'd paint each fig individually, picking the colour palette if that I felt worked best for that fig, without too much concern for the overall aesthetic of the warband.  While I knew this might lead to a more disjoint appearance on the table, I'd get more satisfaction out of painting (and frankly I figured I'd paint more figures that I'd ever field).

Inquisitor Kanis Sol

Born on the harsh winter planet on Fenris, Kanis shares the same icy demeanor and rugged pragmatism of his countrymen.  A member of the Ordo Herticus, Kanis casts his attention to the edges of the Imperium - those far flung realms where the Emperor’s light is perhaps more dimly felt.  He is a firm believer that if these regions are not monitored, the Administratum may come to find the Imperium is much smaller they once thought.

The fig is the stock special edition Inquisitor mini from Games Workshop .  I did up a slightly scenic base to reinforce his 'rural' nature.

Two Chiurgeons: Dr. Mannheim Gaust and his assistant Verlin

Gaust and Verlin serve as both the retinue's medical staff and information extractors - for in the Imperium there is no Hippocratic Oath and the role of healer and torturer often overlap.

These are 2 of the old metal Malifaux figs, McMourning and Sebastian, from Wyrd Miniatures.  

I enjoy the themes and, well, weirdness of Wyrd Miniatures and their quasi Gothic nature can fit well into the 40K universe.  I do feel they can veer into the cartoon/caricature realm, so I've only picked up a few minis so far (though, to be fair, many of the new plastics are far better at avoiding this).

For the Emperor!

Last post I showed you the Inquisitorial Chimeras - this time its their owners:  2 squads of Inquisitorial Stormtroopers.

These guys were painted prior to the new Scions minis (which are fantastic!) and even before the Cadian Kardashians...er... Kasrkins.  So, you know, old school.

Painted them in the traditional Inquisitorial colours but opted to make the masks and cloth a cream colour to give them a slightly different look than the more typical red and black.

They were also built back when the codex had Stormtroopers.  Much of this army is now in limbo, rules wise.  With the old Witch Hunter codex being replaced by the digital Adeptus Sororitas dex, many of the non-Sisters units have faded away (which, unfortunately, is largely what this army consists of).  Perhaps they will be reconstituted as Inquisitor henchmen, or as part of an IG army or perhaps maybe even a new Sisters dex (however unlikely).

The minis are mostly stock - its always a little harder to converted old single-piece metals, but did give the Sergeants new heads, banners and weapons.  

The banners were my first attempt as designing something in Photoshop, printing to a clear decal sheet and putting on a hand-made banner (this was also back before GW was making sculpted, plastic army banners).  Not 100% successful so always had it in mind to redo them at some point.

I also wanted everyone to have gas masks, so sculpted masks onto any of the open faced men.



Adepticon 2016

Back from Adepticon and had an absolute blast.  Was really impressed with the organization, layout and feel of the convention - thanks to everyone who undoubtedly put in a ton of effort to make this the premier miniature con!

I put up a few images on here, but check out the Facebook page or the Instragam account for more photos. I took a few photos of the Crystal Brush entries but an iphone and display cabinet lighting do not do these masterpieces justice.  See CMON's page for beautiful photos of all the pieces.

Definitely recommend getting the VIG badge - bypass the registration line and get extra swag (and the rumours are true - the Adepticon Swagbag does not disappoint!)  The highlight had to be the two player Horders starter set from Privateer press (Legion and Circle).

Vendor hall was fantastic - most of the miniatures game companies had a presence (Forgeworld, Privateer Press, Mantic, Wyrd, Corvus Belli, Reaper, CMON, Battlefront, Wild West Exodus, Arena Rex).

The CMON booth had absolutely fantastic painted miniatures for Rum and Bones, Dark Age and Wrath of Kings.  Arena Rex had equally spectacular figs and Warsenal had some mind-blowing MDF tables.  This is also where Dave Taylor's Warlord was on display - nice work Dave!

Many very nice display/demo boards including the Adepticon charity auction Mechanicus army, the epic (if unfortunately named) Fist Full of Seamen pirate naval combat game, the Beasts of War Hoth table, massive Warhammer 40K and  Fantasy Battle games, Saga Vikings, and James Wapple's Wild West Exodus terrain.

Lots of nice armies and terrain across the various Tournament halls - so many games: Warhammer 40K, Age of Sigmar, Infinity, Malifaux, Kings of War, Dropzone Commander, Firestorm Armada, Guildball, Saga.

If you love your toy soldiers, Adepticon is not to be missed!  Will be back next year.

Here come the minis!

While some of these posts will cover whatever I'm currently working on, they'll also server to show off some of my existing armies, in the form of a project log.

First up are Witch Hunters/Sisters of Battle.  I started this army at the time the first Inquisition codex came out and has been the slowest of slow burn projects.  I was originally going to do Deamonhunters but a friend of mine jumped on the Grey Knights (of which, many years later, he has a very nice 4000pt force).  I really had no interest in either Grey Knights or Sisters, I just wanted to do Inquisitors, so I switched.  It seemed like a fantastic opportunity to

  1. bring in some of the more esoteric concepts around 40K into the game - all those fluff elements that really sell the 40K background
  2. use (and therefore to buy) a wide range of minis from various manufactures as count-as 'agents of the Imperium'

To start the army I painted up an Inquisitor, a small warband (which I'll feature later), two units of Inquisitorial Stormtroopers (back when they were a thing) and a couple of Chimera's for their ride.  Here are a couple of WIP shots of those Chimeras:

I had three concepts when I started

  1. I wanted them to have more bling that a traditional Guard Chimera (this was the Inquisition after all).  I did a little green stuff casting of some Forgeworld bits using Super Sculpty - a stick and bake putty.  Not a super sophisticated technique but with a little practice can yield some decent results.  Over the years I've amassed quite a few of these molds
  2. I needed to get rid of the side lasguns (which always struck me as the most ridiculous part of an otherwise very nice kit).  I removed the guns, puttied over the lasgun hatches and replaced them with a few cast eagles
  3. I wanted a more substantial turret (the original seems a little weedy).  I subbed in a Space Marine Predator turret, modifying its autocannon option to be the Chimera's multi-laser.  This just makes it feel a little more 'tank like'

The turret is fully magnetized (you’ll find out how much I love magnets!), so you can remove the turret, the gun, the hatch, the power pack (and there's a hard point next to the hatch to add a hunter-killer, spotlight, radar, etc).

In terms of colour I went for the classic Inquisitor colour scheme of red and black.  Its a dramatic combination and ties in very well with my Flesh Tearers Space Marine army.

THE FINISHED PAIR

DETAIL OF TURRET and FRONT

'360 VIEWS' OF BOTH TANKS

If you have any questions or comments, please feel free to leave a comment or contact me at mechanicusrexminiatures@gmail.com.